How do i keep my front load washer from smelling

The leading cause of washer maintenance issues comes from using too much soap. Avoid a service call and the icky washer smell by using less laundry soap. There’s no need to fill the soap reservoir to the fill line. Manufacturers are making the reservoirs smaller and smaller to prevent issues.

Pro Tip: When you order laundry detergent, make sure you look for the high-efficiency (HE) label.

Even the most soiled laundry loads only need about two tablespoons of HE liquid detergent. If you use too much soap, your clothes will collect soapy residue, which can irritate your skin. Your washing machine will also collect soap, especially in the gasket where the bad smell comes from.

2. Leave the door open

The leading cause of mildew build-up in front-loading washers is leftover water residue in the door gasket. When you leave the door open to your washing machine, you allow moisture to evaporate over time. Opening the door will also allow fresh air to enter the washer drum.

If you can’t leave the door all the way open, many washers have a magnetic catch that keeps the door ajar. This way, you can leave the washer door open enough to let air in but not compromise the appearance of your laundry space.

3. Wipe water residue from the washer door gasket

When the cycle is complete, simply take a towel and wipe away excess water and residue from the washer gasket. To keep your front-loading machine looking great, wiping the gasket should become part of your laundry routine. The combo of leaving the door open between cycles and wiping the gasket will prevent the washer smell in most cases.

4. Run a self-cleaning cycle

Many washers offer a self-cleaning cycle. Essentially this is a high-temperature wash cycle designed to eliminate mildew-causing bacteria from the washer drum.

If your washing machine doesn’t have a clean washer cycle, you can still clean your washer. Simply run a sanitize or hot water wash every 2-4 weeks. Some brands also recommend purchasing Affresh washing machine cleaning tabs to remove residue and improve the washer smell.

No one likes a smelly washing machine. Here are some of our tips on how to keep your machine fresh and specific instructions on how to clean a smelly washer.

How do i keep my front load washer from smelling

A dirty washing machine sounds like a bit of an oxymoron. A washing machine is constantly doused in warm water, soap, bleach, and other cleaners meant to get the stains and smells out of your clothes. Laundry is supposed to have a comforting fragrance; we even have room scents meant to mimic fresh linen.

But what do you do when your washer machine smells? Or Heaven forbid, the smell starts rubbing off on your clean clothes?

If your washing machine is dirty and is giving off a foul mildew odor, it’s high time you give your machine a much-needed cleaning. So, before you call your repair person to come to check on your washer for leaks or other defects, roll up your sleeves, grab some rubber gloves, and get to cleaning your stinky washing machine.

This is Howard’s guide on how to clean a smelly washer.

Front Load vs Top Load

The first thing to consider when planning how to clean a smelly washer is whether you have a top-load or front load washer. Although front-loader washers are superior in virtually every category from cleaning quality to efficiency, they are far more susceptible to getting smelly and mildewy over time if not properly cleaned.

The design of the front load washing machines causes the increased likelihood of washing machine smells, soap scum build-up, and the development of mold and mildew. High-efficiency front-loaders fill just the bottom half of the washtub with water. The drum then tumbles clothes through the water, eliminating the need to fill the tub up all the way.

High-efficiency (HE) detergents are needed to work with this design. When non-HE laundry detergents is used instead, there isn’t sufficient water to flush the cleaners away. The washer drum can become coated with a layer of soap scum with dirt and debris from your dirty clothes. This combined with the damp heat of your washer is breeding ground for mold and mildew.

A similar effect happens to the rubber door gasket that prevents water from leaking. These gaskets become traps for dirt, soap scum, and other bits, adding another place for foul smells to take hold.

Step-By-Step: How to Clean A Smelly Washer

Wondering how to clean a smelly washer? The first step is to gather your materials. It makes the cleaning process faster. Plus, if you’re missing anything, you can avoid making multiple trips to the store.

What you’ll need:

  • Sponge/Washrag
  • Bleach
  • Baking soda
  • Plain White Vinegar

Optional Items:

  • Rubber Gloves
  • Old toothbrush
  • Essential Oil

Scrubbing

An often-overlooked step in how to clean a smelly washer is the pre-scrub. Start by removing and scrubbing all of the soap, bleach, and fabric softener dispensers. Use an old toothbrush, or the corner of your sponge to dig inside the cracks and corners and clean them well. Remove the buildup inside the pipes of the dispensers if you’re able to reach them.

Top-load model owners need to clean around the door and hinges where dirt can go unseen. For front-load models, wipe down and clean around the rubber seal to remove the accumulated gunk in the rubber gaskets. It’s best to get these areas scrubbed before you deep clean the drum.

Drum Cleaning

Bleach It Away

The most important factor in cleaning your washing machine is mold control. Bleach is incredible for killing mold and mildew. Take precautions, like rubber gloves and room ventilation, when using this product, and NEVER mix bleach with other cleaners.

Add four cups of bleach to a top-loading machine or two cups to a front-loader.

Run a wash cycle at the highest temperature and let the tub fill. Pause the wash cycle once the bleach has mixed with the water. Allow it to sit for 30 minutes before finishing the cycle.

Run a rinse cycle to remove all traces of bleach

Baking Soda & Vinegar Wash

After the bleach has sanitized the drum, this combination works as a secondary washing machine cleaner and deodorizer for your washer. It should remove any lingering dirt and grime, leaving your washer odor-free and back in working order.

  1. Mix ¼ cup of baking soda with ¼ cup of water and add it to your machine’s detergent container.
  2. Use four cups of plain white (not apple cider) vinegar to a top-load machine or two cups to a front-load model.
  3. Pour the vinegar into the drum.
  4. Run a high-temperature cycle. (You may pause the wash and allow the mixture to soak for 30 minutes for a deeper clean.)

If stubborn spots remain, wipe down the inside of the drum with your washrag or sponge, being sure to check all the nooks and the gasket seal. Wiping down the drum also helps remove any remaining vinegar smell. Run a rinse cycle if you want to wash everything away. Lastly, you can use an essential oil on the seal, as an odor remover and mild disinfectant.

If you were wondering how to clean a smelly washer, this is the perfect way to do so!

How do i keep my front load washer from smelling

Prevention

Learning how to clean a smelly washer helps you deal with present odors, but these tips will help prevent it from getting this bad again.

  • Always keep your washing machine door open between washes to let excess moisture evaporate and prevent mildew growth. (This goes for your dryer as well.)
  • Use High Efficiency (HE) detergents. If your machine is a High-Efficiency appliance, especially front load washers, HE detergents help minimize soap scum build-up.
  • Clean out your gasket seal on occasion. The gasket is the most likely suspect for washing machine smells. Cleaning and sanitizing it are vital to keeping your clothes and laundry room fresh.
  • Use the Autowash feature! Washer machines offer an Autowash function to help prevent just this from happening. Run an Autowash every few months to keep it running at an optimal level.

At Howard’s, we’re dedicated to keeping your home running with top quality home appliances. Check out our blog for buying guides and maintenance tips, and don’t forget to check out our website for the best deals on home appliances. Now that you know how to clean a smelly washer, share this with your friends and family!

Looking to Finance?

Extend your budget and apply today for special promotional financing. Howard’s can work with you to find flexible financing and you can receive 18 months of no interest. Learn more about our financing options online today or contact us for more details.

Shop for Washing Machines at Howard’s

Howard’s has been in business for over 75 years and is Southern California’s largest and most trusted appliance retailer. We offer free next-day delivery on purchases over $399 within qualified zip codes scheduled before 5 p.m. in the Southern California area. To make things easier for our customers, we also offer online chat, phone consultations, and online ordering. Shop one of our 13 locations or browse our selection online at Howards.com.

How do I get my front load washer to stop smelling?

Sprinkle 1/3 cup baking soda in an empty washer drum. Pour 2 cups white vinegar in the detergent tray. Run a cleaning cycle or regular wash with hot water. For persistent mildew, pour 2cups bleach in the bleach dispenser and run a second wash cycle.

Should you leave the door open on a front load washer?

It's more common for mold and mildew to develop in front-loading washers, but Better Homes and Gardens says it can happen in top-loaders, too — especially in warm, humid climates. For this reason, Consumer Reports recommends leaving the door or lid open in between loads to give the machine time to dry.

Why does my front loading washer smell like sewer?

Mould, bacteria and tint can accumulate in the seal of the washing machine. The seal is located close to the door. You should clean the seal regularly to prevent the smell that comes from your washing machine.

Do all front loaders stink?

And 15 percent of front-loaders were cited for odor, compared with 5 percent of HE top-loaders and 2 percent of top-load agitator washers. Mold can develop in various parts of the washer, including in the dispensers and the rubber gasket around the opening.