2015 chrysler town and country front turn signal bulb

Home
Chrysler
Town and Country 2013
Lights / Turn Signal - Front (replace bulb)

1. Getting Started - Prepare for the repair

2. Open the Hood - How to pop the hood and prop it open

3. Remove Bulb - Steps to remove a burnt out bulb

4. Helpful Hints - How to find replacement bulb type and other hints

What would you like your bulbs to do? See Clearer Upgrade To LED HID Style

Consider a premium bulb like the Silverstar Ultra with a specially designed filament, proprietary gas mixture and lamp coating for the best downroad lighting. Learn more about Silverstar Ultra.

Upgrade your fog lights to LED with a direct install option that will connect easily to your car’s existing bulb housing. Sylvania has an option with aviation grade aluminum body and a turbo cooled fan. Check out Sylvania LEDs.

Consider a bulb like the zXe with a proprietary Xenon gas mixture to match the white light of HID lights for the brightest headlight and added clarity. More information on zXe bulbs.

5. Replace Bulb - Procedures to replace the new bulb

6. More Info. - Additional information on front signal bulbs

Share on

Diamond Jim helped make these videos
Feedback
Download Chrysler owners manuals

The video above shows you how to change a burnt out front turn signal bulb on your 2013 Chrysler Town and Country. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Town and Country's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Town and Country is relatively easy - turn your hazard lights on and check the front of your Town and Country and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.

When changing the turn signal bulb in your Town and Country, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.

Advance Auto coupon for
20% off entire order: KIOSK20

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!

Harsh downshifts? Slipping gears? You might be low on transmission fluid

Where is the jack location, jack points and other tips on jacking up a vehicle

Burnt out brake lights increase your chance of getting rear ended - check and change yours today

Where is the turn signal bulb located?

Most turn signal lighting systems include four separate bulbs: front left, front right, rear left, and rear right turn signals. These are often placed within the headlight/taillight systems. Many newer vehicles also feature two additional turn signal lights: one placed on each of the side rearview mirrors.

How do you remove a turn signal bulb?

Pull the bulb out toward you. The bulb should slide right out once it has been unscrewed a quarter turn. With the wiring disconnected, you should be able to remove the bulb and its plastic seat together in one motion. The seat for the bulb comes out with it to make it easy to swap signal bulbs.