How to reset oil change light chrysler town and country

Last Updated on November 21, 2020 by Christ

2008-2016 Chrysler Town & Country Oil Change Light Reset Guide – Chrysler Town and Country is a minivan manufactured by Daimler Chrysler. Town and Country were introduced in 1990, while similar Dodge Caravan and Plymouth Voyager have been in production since 1984.

The cars were among the first luxury minivans ever produced. Since their introduction, the Chrysler minivan family (Dodge Caravan and Plymouth Voyager) have been the best-selling minivans in the U.S. market.

2008-2016 Chrysler Town & Country Oil Change Light Reset Guide

Time needed: 7 minutes.

When you exceed the next scheduled oil change interval, the Oil Change Required light will display in the screen. The fastest way to reset the oil light on the Chrysler Town & Country is by pressing the gas pedal. Here’s how to get started:

1. Place the ignition to the RUN position without starting the engine

   If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal

2. Fully depress the GAS pedal, three times within 10 seconds

   Don’t rush, make sure you press it fully

3. Turn off the ignition

   Press the ENGINE START/STOP button once

4. Verify the indicator has been reset by starting the engine

   Done!

These instructions are based on the Chrysler Town & Country owner’s manual. This procedure should apply to the fifth generation of the Chrysler Town & Country (2008 2009 2010 2011 2012 2013 2014 2015 2016 model years). Hopefully, the article 2008-2016 Chrysler Town & Country Oil Change Light Reset Guide can solve your problem. Good Luck!

You will need to Reset oil change light Dodge / Chrysler / Plymouth / Jeep manually after every oil change. If it is not properly reset the system can’t track when your next oil change is due. Click on the links below for procedures to help you reset your Dodge / Chrysler / Plymouth / Jeep oil change light.

Choose Your Model

Choose your model above for the Reset Oil Change Light Dodge / Chrysler / Plymouth / Jeep procedure for your vehicle. If your Dodge / Chrysler / Plymouth / Jeep model is not listed or you have any issues or questions on the Reset Oil Change Light Dodge / Chrysler / Plymouth / Jeep Procedure please check our Frequently Asked Questions page HERE. Restart your Reset Oil Change Light Procedure Search HERE. The information on this site is not intended as repair advice and we are not responsible for any actions you take on any vehicle.

200

2011-15

300

2008-15

Aspen

2008-09

Avenger

2008-15

Caliber

2008-12

Challenger

2008-15

Charger

2008-15

Dakota

2008-11

Dart

2013-15

Dodge Pickup

2008-10

Durango

2008-15

Grand Caravan

2007-15

Jouney

2010-15

Magnum

2008

Nitro

2008-11

Pacifica

2008

Tradesman

2012-15

RAM Pickup

2011-15

RAM ProMaster

2011-15

Sebring

2008-10

Town & Country

2008-15

Wrangler

2008-15

Renegade

2015

Patriot

2008-15

Liberty

2008-12

Grand Cherokee

2008-15

Compass

2008-15

Commander

2008-10

Cherokee

2014-15

Reset Oil Change Light Dodge / Chrysler / Plymouth / Jeep Procedure

1. Turn ignition on, with engine off.
2. On vehicles with keyless START, without pressing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/RUN position (Do not start the engine).
3. Fully depress accelerator pedal slowly 3 times within 10 seconds.
4. Turn ignition off.
5. On vehicles with keyless START, without pressing the brake pedal, push the ENGINE START/STOP button once to return the ignition to the OFF/LOCK position.
6. Start engine. If indicator message illuminates when engine is started, repeat reset procedure.