Potting bench with sink and running water

DH is an out of work wood carver and we have fortunately come across a good amount of fine barn wood! We are looking to build/make some rustic potting benches.
We have a good amount of American rust to add to the decor, and have found several enamel bowls and small sinks to help them function!
What (as an avid gardener) would you want in a potting bench? Do you want running water? A place to hang plants waiting to be re-potted? A place to hang your pot/tools?
Nancy

This beautiful potting bench is made from quality 7/8” western red cedar and large timber redwood that naturally resists weather, insects and decay. This potting bench is sturdy enough to last for years, assembled with galvanized bolts, screws, nails, lag screws, pocket jig screws and glue! It’s perfect for all gardeners to enjoy! The bench features a spacious work area with plenty of room for storage, plants, tools, and knickknacks. We have added a roll up stainless steel drying rack for you to utilize while you rinse off your harvest.

ALL POTTING BENCHES ARE CUSTOM BUILT TO ORDER!

We try our best to capture the lifespan of the cedar and redwood trees by incorporating grain patterns, color variations, knots and knot holes while maintaining the integrity of the lumber. No two potting benches will ever be alike, we want to make every potting bench personal and unique for you as possible.

INCLUDES; A ROUND (14.5"Wx9"D) or RECTANGULAR (22"LX15"WX10"D) galvanized sink with funnel drain, 15 gallon mixing tub, 2.5 gallon galvanized drain bucket (or) 5 gal plastic bucket, water spigot that hooks up to your hose, oak wooden dowels to hang and dry your gloves or boots, stainless steel hand towel bar, fruit/vegetable drying rack, custom rake tool hanger, 3 piece tool set, planter box, smooth rounded edge boards, 3 slots to a store full size rake, shovel etc...and steel casters to easily move your potting bench around your property.

After the big reveal we wanted to bring you all some One Room Challenge bonus material. Here’s how we built a stylish potting station/utility sink to bring more functionality to our yard.

I had the idea to add a utility sink outside to keep our kitchen sink free of renovation clean-up debris (paint, caulk, etc.) We happened to have just enough room to put in a narrow counter-height bench opposite of our raised bed without overwhelming the space. Plumbing up a rain barrel and some gutters completes this attractive “potting station.”

Supplies

Tools

• Miter saw

• Drill and drill bits

• Wrenches

• Framing square

The original plan for the sink, bench, and rain barrel. We ended up making it a bit smaller, not including the additional shelves and moving the sink to the right side of the bench.

The process for making the bench was to cut the 2×4 cedar to make the legs on both the right and left side (center legs come later) and join them with lag bolts and washers to a “rail” that sets the depth of the counter. We didn’t want a solid top, so we made sure to set this depth so that we had about a pencil-width of room between each of the long boards.

The next step is to cut two 2x4s to the length of the countertop and then lag bolt them to the rails at each end on the corners. At this point things will be a little wobbly, even with lag bolts holding everything together. Cutting some regular trapezoids and screwing them in with wood screws to brace each corner really stiffens the whole structure up.

Next up was to frame in the sink opening, which required knowing the sink dimensions. Two short 2x4s about 18-inches apart fastened with lag bolts to the bottom of the long rails, as this allows for the top to lay on top of these supports. The top is made by cutting 2x4s to length and then spacing them about a pencil-width apart on the top which lets water go through the top — perfect for a wet potting area.

I added a shelf down below to the left of the sink in a similar manner to the other parts of the frame to hold some garden accessories. Once the structure was complete I sealed it all using Ready Seal, a semi-transparent oil-based stain, in “Cedar.”

The sink we got came with a nice layout template that made it easy to mark out where to drill some 5/8-inch holes and where to cut the top out. The sink then just dropped right in. I got some female-female brass hose-to-NPT fittings to receive the male ends of the faucet inlet and hose outlet and sealed the connections with Teflon tape.

I wanted the ability to have either city water supplied to the sink or rain from a barrel fed by gravity. This required a rain barrel and stand to elevate the outlet of the rain barrel to roughly the same height as the sink faucet tap. I made a crude stand out of some scrap pine 2x4s and regular 2-inch wood screws with some bracing to stabilize the legs. Houston isn’t really a desert, so collecting rain water is a bit silly, but it is nice to be able to water indoor plants with rainwater whenever I want! It can also tide over our outdoor plants for those weeks where it doesn’t rain in Houston.

In order to fill the rain barrel I had to install gutters and a downspout adapter that diverts some of the flow to the barrel. I calculated that I only needed about 8 feet of gutter to sweep an area of our roof that would fill the rain barrel when it rained 1 inch. Keeping this in mind, I pitched the gutters to that about this much gutter length drained to the downspout, but I also carried the gutters along the length of the patio to a separate downspout that ties into the existing French drain system I have running along the length of our property.

I have a piece of scrap hose connected to the overflow tap on the rain barrel that drains the barrel to the ground if it ever gets too full.

After everything was plumbed up and tested I connected the sink outlet flange to PVC fittings that drained 2-inches into the gravel bed the whole structure sits on. This means that really only water should go down the drain, and no solid wastes. We’re thinking of maybe spray painting the PVC black so it doesn’t stick out so much.

Happy to report that we finally got several inches of rain in late November and the yard, patio, gravel, rain barrel, and sink all drain very well — no more flooding!

I’m not sure how much potting use this bench will get, but it sure is a nice place to set down your drink and enjoy the view!

What is the sink in a potting bench for?

Can I leave a potting bench outside?

Are potting benches useful?