Where to put fabric softener in automatic washing machine

When most of us think about fabric softener, we picture a big bottle of liquid that adds fragrance to our laundry, softens clothes, and reduces static. The lubricating chemicals in fabric softeners coat fabrics to make them feel softer. Static electricity that forms in an automatic dryer from too many loose electrons gives clothing atoms a negative charge. Fabric softeners contain cationic, or positively charged ions, and equalize the electrons and ions to prevent static.

Fabric softeners can be liquid, sheets to use in the dryer, or reusable dryer balls.

  • Liquid fabric softener or fabric conditioner is added to your washer during the rinse cycle. By adding the fabric softener during the rinse cycle, the product is left in the fabric to saturate and coat the wet fibers. The liquid can be scented or unscented. Fabric conditioners contain softening ingredients and chemicals that help prevent fading, stretching, and pilling.
  • Most dryer sheets, made of non-woven synthetic fabric, are coated with a solution of quaternary ammonium salt or silicone oil-based fabric softener (scented or unscented). Dryer heat melts the fabric softener allowing the coating to transfer to fabrics to make them feel softer to the touch.
  • Dryer balls can be made from natural fibers (wool dryer balls) or synthetic materials. They do not leave any type of chemical coating on fabrics to make them feel softer but do reduce static by equalizing electrons and ions. Plastic dryer balls also work by repeatedly hitting the fabric as it tumbles in the dryer, reducing fabric stiffness and removing lint.

Before You Use Fabric Softener

Before using liquid fabric softener or dryer sheets, take time to check the care label of the clothing, as fabric softeners can alter the performance of some fabrics. The lubricants in fabric softeners and dryer sheets leave a film on fabric that can affect fire resistance, breathability, and moisture-wicking factors.

Warning

Do not use liquid fabric softener or dryer sheets on the following fabrics. Choose natural fiber wool dryer balls instead to reduce static.

  • Flame-resistant clothing, especially children's pajamas: reduces self-extinguishing capacity
  • Water-repellent fabrics: reduces performance
  • Microfiber cleaning towels: the polyester and nylon of microfiber actually bonds to the oils and conditioners in the softener, making the loss in absorbency cumulative over time.
  • Athletic wear: reduces moisture-wicking performance
  • Microfiber fleece and compression garments: reduces breathability

Materials

  • Liquid fabric softener
  • Dryer sheets

The Spruce / Ana Cadena

How to Use Liquid Fabric Softener

  1. Fill the Fabric Softener Dispenser

    Most washers have a fabric softener dispenser that can be filled for single or multiple loads. Add the liquid softener to the dispenser before you select laundry cycles, load size, and water temperature. Your washer guide will have instructions for your model. If you have lost the guide, check the manufacturer's website for instructions.

    The Spruce / Ana Cadena

  2. Add Manually to the Final Rinse Cycle

    If your washer does not have a dispenser, add the fabric softener when the washer drum is full of water for the rinse cycle.

    The Spruce / Ana Cadena

  3. Use a Fabric Softener Dispenser Ball

    If you can't remember to add the fabric softener during the rinse cycle, there are plastic balls that dispense fabric softener automatically. The ball is filled with the appropriate amount of fabric softener liquid and added with the dirty laundry.

    When the washer begins to spin at the end of the wash cycle, the ball opens and the fabric softener is added to the wet clothes as the rinse cycle begins.

    Warning

    While the dispenser balls are convenient, they may cause fabric softener stains on clothing if the washer does not contain enough water for even dispersion.

    The Spruce / Ana Cadena

How to Use Dryer Sheets

  1. Load Wet Laundry Into the Dryer

    Give each wet piece of laundry a shake to help reduce wrinkles and place them in the dryer. Do not overload the dryer. The clothes and dryer sheet need room to move freely.

    The Spruce / Ana Cadena

  2. Add the Dryer Sheet

    Place the dryer sheet on top of the load of laundry. Adding it last helps it circulate freely in the dryer without getting trapped between garments.

    The Spruce / Ana Cadena

  3. Remove the Dryer Sheet

    When the cycle is complete, remove the dryer sheet. Leaving too many dryer sheets in the drum can cause them to become stuck in the lint filter or block an air vent. Dispose of the sheet properly.

    The Spruce / Ana Cadena

How to Use Dryer Balls

  1. Load the Dryer With Wet Laundry

    Load the dryer with the freshly washed laundry.

    The Spruce / Ana Cadena

  2. Add the Dryer Balls

    Add the natural wool or plastic dryer balls to the drum on top of the wet laundry. Use two or three balls to help absorb the most static. Remove the balls at the end of the cycle to be used again.

    The Spruce / Ana Cadena

Tips for Using Fabric Softeners

  • Clean your washer regularly after using use in-wash fabric softeners. The same lubricants that coat the fabrics also coat the drum of your washer and trap soil and odors.
  • Clean your dryer at least four times per year if you use dryer sheets to prevent residue from redepositing on fabrics.

Where do you put fabric softener in a washing machine?

Pop the softener into the detergent drawer before beginning your wash cycle, at the same time as you add your detergent. Look for a small compartment which may have a star or flower icon – this indicates where you should put the softener.

Where do I put fabric softener if there is no dispenser?

If you're wondering how to use fabric softener in the washing machine without a dispenser, all you need to do is add the correct amount to the lid and place it directly in the drum of the washing machine.

What if my washer doesn't have a fabric softener dispenser?

When adding fabric softener in top load washer without a dispenser, simply pour it in during the rinse cycle. We suggest pouring it into the washer tub's water instead of directly on clothing to avoid staining.