I have a water cooled Manitowoc Model SY0605W. The water pump is burned and smoking. I have the new water pump Model 82-5210-9 already. However, i can not find any mount or screw around the water pump. The space is very tighten, i can only fit one hand in there. How do i remove the old one?
jcrew4242
Take the water trough out.
Pull the water pump straight down and out. Disconnect its molex plug and remove.
i try to push down and pull the whole pump. i also try push down and turn left or right.
jcrew4242
If its been in there for a while it might be stuck.
After they've been in place for a few years they can be difficult to remove.
You might have to just keep gently rocking it back and forth while pulling down.
Thank Mike, i am going to pull it a bit harder now.
jcrew4242
damn it.... it is still unable to remove....
jcrew4242
It's already broke Hit it with something hard
if i have the space... i will hit it damn hard
jcrew4242
Also be sure that the o ring is there on the new one..damn ring got me last week
Take the trough out and slam the top of it...then it'll come out
Do you mean the white mount outside of the motor?
Originally Posted by UmmScott
Take the trough
out and slam the top of it...then it'll come out
jcrew4242
Originally Posted by jcrew4242
Do you mean the white mount outside of the motor?
Twist wiggle....and just push it comes right out
i keep push in and push in, i can
move up and down and turn right and left, but i still can pull the whole pump out.
Originally Posted by UmmScott
Twist wiggle....and
just push it comes right out
jcrew4242
I finally got it out. Thank you so much guys!!
jcrew4242
Never had that much trouble taking it out.
Originally Posted by jcrew4242
I finally got it out. Thank you so much guys!!
Was something hanging up or just first time? Seen some just fall out when nobody is looking
it is stucked very badly and i don't want to pull too hard. i might break the water pan
jcrew4242
Hummmmm Did you pull up or down?
i removed the water pan and pull down the pump
jcrew4242
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is
On
[VIDEO] code is On
HTML code is Off
Forum Rules
How long should a Manitowoc ice machine last?
As an industry standard, the average life of a commercial ice machine is around 10 years, however there are a few variables that will affect the life of your ice machine.
Why is my Manitowoc ice machine not dropping ice?
This could mean that the water line is damaged or worn, or the connection is loose. Faulty or broken water inlet valve – The water inlet valve allows the ice machine to control the amount and flow of water to make ice, and if it's broken or faulty, it may need to be replaced by a service tech.
Why does my Manitowoc ice machine keep shutting off?
When your Manitowoc ice machine shuts down prematurely, it most likely is going off on what's called a safety limit. On Q Series ice machines there are 2 different safety limits, that will help you diagnose the problem.
What does the red wrench light mean on a Manitowoc ice machine?
• The 'Service' wrench icon illuminates in red and blinks to provide advance notice of a potential problem. The machine continues to operate in a safe mode to allow time for the service technician to contacted. Convenience.
