Is synthetic oil better than conventional oil

The next time you walk in to your local shop to get your oil changed and the service attendant asks you synthetic or regular? You just might have to think twice before you answer...for the sake of your wallet, and yes, the environment too!

First off, synthetic oil is better than conventional oil when it comes to its form and function. Conventional oil could never stand up to synthetic when it comes to longevity and ability to handle extreme high temperatures without breaking down.

But all this advanced technology doesn't come cheap. A synthetic oil change can cost over twice as much as conventional oil...but is it worth it beyond its obvious better performance characteristics?

This is not exactly a straight yes or no answer to go along with this question as there are several variables to consider, but in general, most experts would agree that synthetic is (for now) the lesser of the two evils.

Their logic stems from the fact that while conventional oil is evil because it is derived from petroleum, synthetics are unfortunately formed by chemicals that are no less harmful to the environment... but there is a difference here. Synthetics can last as much as three times longer than conventional oil, which means that you could be dumping less than 15 to 24 quarts of oil per year.

This is of course assuming that you are not recycling your used oil, because if you are, at least a good portion of this oil should be getting reused, but it is quite an extensive process to filter used oil for reuse...so the question still remains, which is better?

For your pocket book, there is not much of a difference if you allow your oil change cycles to last longer with synthetic. There is a debate on when you should change your oil, because the age old consensus has always been every 3 months or 3,000 miles, whichever comes first.

With todays technology, synthetics are cleaner and meaner (just not necessarily any greener). Their composition is much cleaner, because it is derived in a laboratory rather than nature, and it has been proven to have a lower volatility and therefore not vaporize out the exhaust as quickly.

Synthetics have also been shown to produce less resistance in the engine and therefore offer more horsepower and overall efficiency for the engine. This added horsepower in return means that the engine will be able to perform at the same level as before, but using slightly less gas.

Depending on where you drive (dusty, dirty climates), and how much and far you drive (shorter distances don't heat oil enough to boil off condensation in the engine), you can probably last between oil changes for 10,000, 15,000, on up to 20,000 miles with some brands of synthetic.

There is a middle choice to make things even more confusing, the synthetic blend. This mixes the two together to give you a moderately better oil at better cost to you. These don't quite have the longevity of the full synthetics, so it really all comes out in the wash in the end.

If you want to be on the safe side, you can follow what your manufacturer recommends as far as oil goes. In general more performance oriented vehicles require synthetic because of the high heat that builds in these engines, whereas conventional engines don't require anything special.

While synthetics appear to be the more environmentally friendly choice for the moment, there is hope for a vegetable oil (such as canola) alternative that would beat synthetic in both form and function, as well as production price. But the same problem exists here as it does for some biofuel alternatives.

We would have to surrender part of our agricultural crops for food, to produce these crops for motor oil. Food for the planet...or a cleaner environment, why is there never a clearcut choice towards the path of least carbon foot resistance?

Until such a time that we have a more obvious choice, we can continue to make our best informed decisions on engine oil. Sometimes it is not so much a choice of right and a wrong, as it is a choice of the lesser of the two wrongs. Of course, if you are considering going electric, you cold bypass this dilemma altogether!

Feel the need for sustainable speed? See what eco-engineers are doing to create super-charged but low-impact cars, bikes, and planes on Planet Green TV's Mean Green Machines.

Types of Motor Oil

Motor oil can be segmented into four basic varieties – synthetic oil, synthetic blend oils, high mileage oil and conventional motor oil. While there are several factors in comparing synthetic vs conventional oil and synthetic blend vs full synthetic, there are unique characteristics and specifications to help you determine which oil is the best fit for your vehicle.

Synthetic Motor Oil

Synthetic motor oil has gone through a chemically engineered process. Synthetic oil molecules are more uniform in shape with fewer impurities and better properties than conventional oil molecules. In most cases, synthetic oil has better extreme high temperature and low temperature performance. Synthetic oils are generally formulated with higher performing additives.

Synthetic Blend Motor Oil

The difference between synthetic oil and a synthetic blend is that a synthetic blend motor oil uses a mixture of synthetic and conventional base oils for added resistance to oxidation (compared to conventional oil) and provides excellent low-temperature properties.

High-Mileage Motor Oil

High-mileage motor oil is specially formulated for late model vehicles or newer vehicles with over 75,000 miles. High mileage motor oil, with its unique additives and formulation, helps to reduce oil burn-off, and helps prevent oil leaks that may occur in older engines. Pennzoil sells many kinds of high-mileage motor oil, such as Pennzoil Platinum® High Mileage Full Synthetic Motor Oil and Pennzoil® High Mileage Motor Oil

Conventional Motor Oil

Conventional motor oils can be formulated in a range of viscosity grades and quality levels. Conventional motor oil is recommended for drivers with simple engine designs and regular (as opposed to severe) driving styles.

api

Motor Oil Grade Designations

Motor oils use a rating system developed by the Society of Automotive Engineers (SAE), to classify oil by viscosity. Viscosity is a fluid's resistance to flow. Fluids that are thin (like water) have a low viscosity, and fluids that are thick (like honey) have a high viscosity. Motor oil also changes in viscosity measurement as it is heated or cooled. SAE viscosity grades

Multi-grade viscosity motor oils are able to perform at a wide range of temperatures. For an oil with an SAE viscosity grade of 0W-20, the “0” is the cold-temperature viscosity rating (the "W" stands for "Winter"), and the “20” is the high temperature viscosity rating. Multigrade viscosity motor oil flows well at low temperatures, but still protects the engine at high temperatures

For comparison’s sake, SAE 5W-30 and SAE 0W-30 will flow better at colder temperatures than SAE 10W-30, while still providing protection at higher temperatures.

Always follow the vehicle owner's manual to determine the correct motor oil specification, viscosity grade, and oil drain interval for your engine.

api

The API/ILSAC “Starburst”

This symbol is shown on quality motor oils that meet current minimum industry requirements. API is an acronym for the American Petroleum Institute. The institute’s Starburst stamp of approval—“American Petroleum Institute Certified”—was created to help consumers identify engine oils that meet minimum performance standards set by vehicle and engine manufacturers.

The Starburst identifies engine oils recommended for a certain application, such as “For Gasoline Engines.” To carry this symbol on the container, the oil must meet the most current requirements of ILSAC, which is the International Lubricant Standardization and Approval Committee, a joint effort of U.S. and Japanese automobile manufacturers. The API/ILSAC Starburst is found on the front label of qualified motor oil bottles.

api

The API “donut”

Another identifier on motor oil containers is the API “donut” typically found on the back label. The symbol is divided into three parts. The top half of the circle (2) indicates the API service rating, also called the performance level. The center of the circle (3) denotes the SAE viscosity, which we just discussed. The lower half of the circle (4) indicates whether the oil has demonstrated certain resource conserving or energy-conserving properties.

In the top part of the donut, the words “API Service XXXXX” (5) indicate the type of engine and performance the oil provides. API Service SN the current rating means “S” for Service Station oil (for gasoline engines) and N the current level of service. Or it will say “API Service CJ-4.” API service CJ-4 means “C” for commercial engines (diesel engines) and J-4 where J is the current performance level and 4 indicates a 4-stroke diesel (a 2 will be used for 2-stroke diesel engines).

Check your owner’s manual for the recommendation for your vehicle. The API Service Ratings are backward-compatible, so older vehicles can use the current designation.

What is Multi-weight (or Multi-Grade) motor oil and what is the meaning of Viscosity Grade?

When motor oil was first introduced, it was sold only in monograde varieties, such as SAE-X. Multi-weight engine oils were first introduced in the 1950’s to address the issues of varying temperatures and engine operating conditions.  The first number of a multi-grade oil designates the ability for the oil to be pumped and flow at colder temperatures; the “W” stands for winter.  Thus, a 0W oil will be able to flow faster and get to critical engine components better than a 5W or a 10W oil; especially in extreme cold conditions and at engine start-up.

The second number is the viscosity measurement value at engine operating conditions. This viscosity number is crucial for proper lubrication and protection of your engine.  Thus, a vehicle that recommends using a SAE 5W-20 can use a multi-grade oil SAE 0W-20; especially in colder climate regions.  Using a lower “winter” weight can help with faster oil delivery, quicker engine warm up to operating conditions and give fuel economy benefits compared to a 5W or 10W motor oil.

What are the disadvantages of synthetic oil?

A few disadvantages of synthetic oil to be aware of include: Probably the most glaring downside of synthetic oil is the cost. The price of synthetic oil is around two to four times the price of conventional oil. Synthetics may be more prone to additives precipitation during cold storage conditions.

Is it OK to switch from conventional to synthetic oil?

Synthetic oils typically provide better protection than conventional oils, but switching back and forth between full synthetic and conventional oil will not damage the engine.

When should you not use synthetic oil?

This being said, however, it is still not recommended to use synthetic oil in engines that have experienced significant actions – specifically, those that have reached around 75,000 miles on the odometer.

When should I use synthetic oil vs conventional?

If you live in a region with very cold winters or very hot summers, or if you use your vehicle for towing or hauling heavy material, synthetic oil helps protect the engine from strain and won't break down as quickly as conventional oil. If you have an older engine that's prone to sludge buildup.