How to turn off interior lights in jeep cherokee

How to turn off interior lights in jeep cherokee


k with out knowing more about your jeep and assuming you do not have keyless entry, alarm, etc etc. The way the headlight switches work I doubt that that is it. I will tell you what I did on my 98, this happened to me just a short little while ago. Here is what I did. I opened all four doors and the hatch, un bolted the door switches from the jams and then disconnected them one at a time. If your lights go out then you have found your problem. If they do not go out then move on to next step. The door hatch swtich is located in the tail gate you will have to remove the plastic (pretty easy) to get to it, with all other switches removed then unplug it. If the lights are still on then my suggestion would be its in the rear quarter panel behind the tail light (this is where mine was on my 98 cherokee). Remove the passenger side plastic from inside the trunk area and the wiring harness runs down the pillar and then goes through a hole in the body. This is where my wiring harness was cut. Apparently this is common on a lot of cherokees.

Interior lights are a useful element that we don’t give much thought to until they cease working. When you are going down the road in the dark and they won’t turn off, and when you are looking for something and they won’t turn on.

This is a frustrating and perhaps hazardous scenario that many Jeep owners have encountered at one point or another. Fortunately, the cause is frequently an overly complex light knob or something far simpler.

In this article, I am going to talk about everything about unresponsive Interior Light, possible reasons, and how to fix it.

Continue reading to learn about all of it.

What Is A Interior or Dome Light?

The cabin of a truck, bus, car, or other vehicle is illuminated by dome lights. They’re usually located overhead and have On/Off/Auto lighting switches.

When a door opens, automatic dome lights turn on and off automatically; they may also turn on when the engine is turned off.

To assist your eyes to acclimate, many automated dome lights are designed to fade rather than turn off. For tasks like drafting a report or reading a map, dome lights may give better lighting than conventional overhead courtesy lights.

Instead of white light, a dome light can emit colored light such as red, blue, or green for certain applications. Dome light replacements exist in a variety of designs, materials, and electrical connections; some require replacing the complete assembly, while others allow you to change only the lamp (light bulb).

Why Are The Interior Lights Staying on?

If your Jeep’s interior lights stay on, one of three things might be wrong: the fuse is jammed, one of your doors is open, or the light switch is set to “ON.” Each of these problems has a straightforward solution that should take no more than 10 minutes to complete.

You can check for these signs by following these steps:

Step 1: All of the Jeep’s doors should be opened and closed. Make sure all of the doors are completely shut. If the lights are still turned on, you should check the light switch.

Step 2: On the headlight control panel, press the light switch. For the lights to turn off, they must be fully pushed. The fuse may be blocked if the switch is in the “OFF” position yet the lights are still on.

Step 3: Remove the cover from the underhood fuse block by opening the hood. In slot 7, look for the fuse. This is the fuse for the interior lights. Remove the fuse and replace it with a fresh 10A fuse from the fuse block.

Close the hood and reattach the fuse box cover.

How Do You Turn off The Interior Light?

The procedure of turning off the Interior Light is simple. There are two buttons on the sides of the light and if you push them, it should turn the lights off.

If this does not work, you should follow these steps:

Materials Needed:

  • New instrument cluster
  • Replacement light switch

Step 1 – Check the rear dome light

The rear dome light in the cargo area, unlike the front dome light, may be switched on or off by just pressing it.

The problem is that many people tap it by accident when loading or unloading items from the rear, and some individuals even have toddlers who like playing with the light.

When you figure it out, it may be a difficult circumstance that makes you feel not-so-smart. Even if it is turned on, this light will switch off after around 15 minutes.

Step 2 – Check the light switch

The switch may be used to control the interior light operations. Another perplexing feature of the Jeep’s interior lighting is how to adjust them, which is determined by the position of the light switch.

Turn the knob to the “ON” position, then slide it back one notch to configure the inside lights to come on when you open the door and turn it off when you close it.

Step 3 – Check the connectors in the door

For the lights to turn on when the door is opened, they must be linked. It’s an easy remedy, but if you remove the doors and forget to rejoin the connections, your Jeep’s inside lights will not turn on when the doors are opened.

Double-check that the connectors are properly attached and in excellent working order.

Step 4 – Check the instrument cluster and light switch

Your lights will cease operating if there is a ground fault. If all else fails, you’re most likely dealing with an electrical problem.

A ground fault in your instrument cluster might cause all of your interior lights to go out.

If this is the cause of your problem, a new instrument cluster is required to fix it, so fortunately your Jeep is still under warranty.

Another possible source of trouble is the light switch itself, which might break down with time.

Although both of these problems are uncommon in contemporary automobiles, there are documented occurrences to learn from.

When Is It Time to Replace the Interior Light?

After a given amount of time, the dome light bulb will fail, whether it burns out, the wiring fails, or there is another issue with it. Because this is a possibility, you should be aware of the dome light bulb’s symptoms before it entirely fails.

The following are signs that your dome light bulb needs to be replaced:

  • The dome light will not work at all when you flip the switch or open the doors
  • The dome light bulb is dim and not as bright as it used to be
  • The dome light bulb flickers

Replacing your interior light can be complicated if you are not familiar with the procedure. It is recommended that you take your vehicle to a professional to replace the interior light.

Will Interior Lights Drain Battery?

As leaving the interior lights on in your Jeep can drain the battery, it is important that you fix the issue as soon as you can. If the interior light is left turned on, the battery can drain within 10 to 27 hours.

Conclusion

Interior lights are an important part of the car. It is very convenient and we don’t think of it much until it gets broken.

If you have a malfunctioning interior light, it is recommended that you take your vehicle for an evaluation and get it fixed.

Related Posts:

  • Jeep Touch Screen Not Working Issue: How to Fix it?
  • Why are Jeep Abs and Traction Control Lights On? Explained
  • 5 Ideas to Improve Your Jeep Wrangler Sound System
  • What does it mean when your Jeep says Oil Change Required?
  • Jeep XJ LS Swap: What is it, What does it do and How to do

How do you turn off interior lights with door open?

The light switch should be on the ceiling or on the interior door. You may have the option to dim the light, or you may only have an on/off option.