I have a bissell pro heat carpet cleaner and the clear face plate(were the water is carried back up to the tank)from the carpet,anyway this piece which is plastic is becoming dirty with pet hair,etc.Theres no way to remove the piece so I can rinse it out nor is the opening at the bottom large enough to stick something up there to try to reach some of the debris.Anyone have any ideas on how ro clean it out.I would think eventually it would get very cluttered.Thanks in advance for any ideas..Debbie
Let's begin with dislikes and likes. Keep in mind I am a person who values functionality and purpose over bells and whistles. Does the product do what I need it to do:
CONS:
1. This machine is a bit noisier than other carpet cleaners and I've used several but it's just a minor dislike.
2. The Clean tank is only 1 gallon so you will fill this tank more often on your cleaning tasks. I started on a 15 X 18 throw rug with the "Deep Clean" setting. The fill tank needed two total fills to do the job.
3. The Dirty tank seems larger but only fills to 1/3 capacity before the orange float in the tank cuts off the suction. Funny story - I thought, "Great. 15 minutes into the job and the machine breaks." Not to panic, folks. It's the float switch in the dirty tank that "kills" the machine at 1/3 full which is about 5/6ths of the fill tank capacity.
4. Some assembly is required for the handle. A few parts and a screw needing a Philips head screwdriver. Very straight forward though.
Absolutely, this machine could definitely use a bigger clean and dirty tank but it's not a deal breaker.
PROS:
1. The Fill tank is very easy to use. It removes easily, can be filled easily, and does not leak! That's a huge plus. So many other models (like the Hoover) leak a LOT. Not to trash my old Hoover - those machines really do a great job of cleaning but it's a hassle when the tanks dribble all the way to the sink and back.
2. The dirty tank is also really easy to use. It also does not leak. There is a rubber tabbed empty port for quick empty which is nice, but I prefer to fully clean each use. For that, you quick empty then turn the tank over. You unscrew the one big plastic ring on the bottom (goes on and off easily and tightens with a little bit of hand turning.) You pull the float unit carefully out of the tank holding the float switch towards your hand or it sticks at the top. You rotate the float out of the tank and then you can easily clean both the tank and the float unit. Cleans easily - I do it every time to get the pet hair out as there is always a little. You return the float unit into the tank in reverse order, and it slips right in. Hand tighten the plastic ring that screws on and your ready to go - just make sure the rubber tab is seated.
3. Yes, the tanks are smaller, but they are really easy to use and it makes the unit light and easy to maneuver.
4. The machine glides easily and mostly without effort over your carpet surface. You do have to lift the unit onto the carpet or rug because it won't just roll onto a rug like a vacuum cleaner would. While on the rug you can turn easily, keep straight (Some carpet cleaners always 'yaw' one way or the other. This unit does not.) and clean edges easily. Just keep the wheels on the rug.
5. Does it clean? WOW! It really does a great job. This is where this machine really shines and why I like it despite some minor detractions. The cord is a decent length for a carpet machine as well. I was able to do my entire throw rug without moving the cord. The carpet is also much dryer from the GREAT suction even after several passes.
6. Another big plus you don't get with other machines are the attachments for stairs and upholstery. The stair cleaner hose is fairly long, fits easily into the machine (Trust me, some machines are a nightmare to attach and use.) and cleans well. On some machines this is all extra money to purchase or find. In this machine's box it all comes standard.
Overall: 4 stars for the few annoyances but this machine is 5 star ALL THE WAY if you want a machine that really works well, comes with everything you need, is easy to use, lightweight and stores away easily. If you are reading, Bissel, make a larger version of this machine with bigger tanks and capacity.
The Bissell Proheat Pet Carpet Cleaner is a machine for cleaning a carpet that uses hot water to remove stains and dirt. Since the device heats the water, it can be beneficial when you have an accident or spill in your home. Unfortunately, many people are unaware of how to take apart this machine to clean it thoroughly. The
Bissell Proheat Pet Carpet Cleaner is an excellent tool for anyone who has pets or children because they make accidents happen more frequently than most adults would like, but the Bissell is great for cleaning up these messes. By following these instructions carefully, anyone can quickly learn how to take apart a Bissell proheat pet
carpet cleaner with little hassle or frustration. First, check to see if your Bissell Proheat Pet Carpet Cleaner is the model that needs to be taken apart for you
to access the belt. If it has a solid metal handle, it doesn’t need to be taken apart. It also helps if you take a photo of how yours is put together currently before starting the disassembly process. Then, check to see if your model has a metal handle rather than a
plastic one. If it doesn’t have a metal handle, you’ll need to take off the hose and wand first, and then grip the handle and pull toward yourself to take it off. If your Bissell Proheat Pet Carpet Cleaner does have a plastic handle, you can skip this step. However, if it has a metal one, first, you’ll need to
unclip the hose from the back of the machine. It’s held in by a small clip concealed behind a bit of plastic that prevents water from leaking out or dirt from getting into the machine during use. You should be able to wedge something flat inside there to press down on the clip and release it. Then push it towards yourself gently to take off the tube connected to your
cleaner’s base. After this part is done, do the same thing with your wand right below the cleaner’s handle. The wand and your cleaner’s base should just come apart. If not, then you will need to look closer to see if there is another clip or a twist lock somewhere. To remove the bottom panel, first snap off the dirty water container, then lift the front end of the machine up an inch or two and pull it towards yourself. Some clips are holding this part in place, which should open up easily when you do this maneuver. Once it
does, it slides out toward yourself for easy access to all of your Bissell Proheat Pet Carpet Cleaner’s inner workings. It’s time to take the top cover off your Bissell Proheat Pet Carpet Cleaner. Again, there are no clips to worry about, but it might still be a bit stubborn. You’ll have to wiggle the whole top around a bit for it to
come off, but it should come off if you pull toward yourself. You can replace the belt now that the cover is gone, but be aware that it’s a little tricky. It’s easiest to pull the whole agitator assembly out of its slot and then slide the belt underneath it. Then put the agitator assembly back into its place and try to line up the belt with it so you can put your cover back on. With the top cover of your Bissell Proheat Pet
Carpet Cleaner removed, the agitator assembly should now be accessible. To remove the black brush roll, simply pull it off with a bit of force being applied toward yourself.Step to Follow on How to Take Apart a Bissell Proheat Pet Carpet Cleaner
Step One: Determine
Step Two: Take Hose and Wand Off
Step Three: Wiggle Around a bit of Bit
Step Four: Take Off Top Cover
Step Five: Remove Agitator Assembly
You don’t have to do anything special to get it to release, but once it’s off, you’ll need to take care with the belt that turns the brush roll. It’s connected to some spindles connected to an orange-ish piece connected to your agitator assembly.
Step Six: Take Off Agitator Assembly
First, pull the agitator assembly straight up and out of its slot. Then make sure that nothing is obstructing it from moving around right now, and turn it on. If everything is clear, you can wiggle your agitator assembly around a bit of a bit to free up the belt from its spindles and orange-ish piece. If you’re unsure, don’t hesitate to call us here at All City Appliance Repair!
You should be able to easily remove the belt by pulling it from the front. If you’re finding all this confusing, just know that the belt should come off pretty easily once you take your agitator assembly completely out of its slot. Following these steps should help you learn how to take apart a Bissell proheat pet carpet cleaner.
Step Seven: Put Everything Back Together
To reassemble your Bissell Proheat Pet Carpet Cleaner, simply reverse the steps you took to disassemble it. Slide the agitator assembly back into place and make sure the belt is properly aligned with its spindles and the orange-ish piece.
Then slide the front end right below this setup and snap down this front panel. Then put your dirty water container back into place and push its lid onto its clips. Lastly, wiggle the bottom of your machine back into place along with all of its clips so it can close properly.
You Can Check It Out to Find Cat Pee on Carpet
Step Eight: Maintain Your Cleaner
Now that you’ve taken your Bissell Proheat Pet Carpet Cleaner apart, this is an excellent time to clean out all of the filters. Just lift on each one at its base and take it off to wash thoroughly with warm, soapy water. There are filters underneath each of your dirty water tanks as well, so take those out and clean them off.
You Can Check It Out to: Drill Through Carpet
Frequently Asked Questions
Is Bissell Proheat Worth?
Bissell Proheat is a great choice if you are looking for a high-quality vacuum cleaner to purchase. This machine has many features that make it ideal for both home users and professionals. It can easily handle dirt, pet hair, and other debris in your house or office. Additionally, Bissell Proheat boasts a long cord length, so you can move it around easily.
The cushioned roller system ensures that your floors are never harmed by the suction power of the machine. And with its easy-to-use controls, cleaning is simple and straightforward even for beginners. Overall, Bissell Proheat delivers on all of its promises and is an excellent investment in your home or business.
Why Is My Bissell Proheat Carpet Cleaner Not Picking Up Water?
There are a few reasons why your Bissell Proheat Carpet Cleaner may not be picking up water. One possibility is that the filter may have become clogged, which would cause the machine to struggle to extract moisture from the carpet. Another potential problem is that there may be an issue with one of the suction cups. If this latter issue is identified and fixed, you should see an improvement in performance.
If none of these solutions work, it might be time for a new carpet cleaner altogether! But before making this decision, try cleaning all of the filters and checking for any blockages before replacing anything.
Does the Bissell Proheat Pet Heat the Water?
The Bissell Proheat Pet Heat is designed to heat water quickly and efficiently. It uses a technology called TurboPower, which operates at high speeds to get the water hot in just a few seconds. Additionally, it has an advanced ThermalBlock system that helps prevent overheating and maximize energy efficiency.
This product is perfect for households with pets who have difficulty staying warm or those who need to make large batches of boiling water quickly. It also comes with a 1-year warranty, so you can be sure that you’re getting your money’s worth!
Can You Use the Bissell Proheat as Just a Vacuum?
You can certainly use the Bissell Proheat as just a vacuum, but there are a few things to keep in mind. First, the machine is designed for deep cleaning surfaces such as carpets and upholstery. If you just need to clean up a small area, you may be better off using a different vacuum cleaner. Second, the Proheat requires special detergent and water combinations to work properly. Make sure to read the instructions carefully before using the machine.
Conclusion
The Bissell Proheat Pet Carpet Cleaner is a popular choice for pet owners because of its efficiency. However, it can be challenging to take apart and clean the machine when you need to perform maintenance. Fortunately, with these instructions, you should be able to get it apart easily and put it back together without much trouble.
This article has shown you how to take apart a Bissell proheat pet carpet cleaner. If you still have troubles, feel free to leave a comment, and we’ll help in any way we can. Just keep in mind that there is no magic trick to get it apart easily. You have to move slowly and carefully while pulling the machine back into place.
You can also read – How to clean carpet cleaner brushes
Related Articles
Added to wishlistRemoved from wishlist0 Added to wishlistRemoved from wishlist0 Added to wishlistRemoved from wishlist0 Added to wishlistRemoved from wishlist0