Last Updated on November 21, 2020 by Christ
2008-2016 Chrysler Town & Country Oil Change Light Reset Guide – Chrysler Town and Country is a minivan manufactured by Daimler Chrysler. Town and Country were introduced in 1990, while similar Dodge Caravan and Plymouth Voyager have been in production since 1984.
The cars were among the first luxury minivans ever produced. Since their introduction, the Chrysler minivan family (Dodge Caravan and Plymouth Voyager) have been the best-selling minivans in the U.S. market.
2008-2016 Chrysler Town & Country Oil Change Light Reset Guide
Time needed: 7 minutes.
When you exceed the next scheduled oil change interval, the Oil Change Required light will display in the screen. The fastest way to reset the oil light on the Chrysler Town & Country is by pressing the gas pedal. Here’s how to get started:
- Place the ignition to the RUN position without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal
- Fully depress the GAS pedal, three times within 10 seconds
Don’t rush, make sure you press it fully
- Turn off the ignition
Press the ENGINE START/STOP button once
- Verify the indicator has been reset by starting the engine
Done!
These instructions are based on the Chrysler Town & Country owner’s manual. This procedure should apply to the fifth generation of the Chrysler Town & Country (2008 2009 2010 2011 2012 2013 2014 2015 2016 model years). Hopefully, the article 2008-2016 Chrysler Town & Country Oil Change Light Reset Guide can solve your problem. Good Luck!
You will need to Reset oil change light Dodge / Chrysler / Plymouth / Jeep manually after every oil change. If it is not properly reset the system can’t track when your next oil change is due. Click on the links below for procedures to help you reset your Dodge / Chrysler / Plymouth / Jeep oil change light. Choose your model above for the Reset Oil Change Light Dodge / Chrysler / Plymouth / Jeep procedure for your vehicle. If your Dodge / Chrysler / Plymouth / Jeep model is not listed or you have any issues or questions on the Reset Oil Change Light Dodge / Chrysler / Plymouth /
Jeep Procedure please check our Frequently Asked Questions page HERE. Restart your Reset Oil Change Light Procedure Search HERE. The information on this site is not intended as repair advice and we are not responsible for
any actions you take on any vehicle. 2011-15 2008-15 2008-09 2008-15 2008-12 2008-15200
300
Aspen
Avenger
Caliber
Challenger
Charger
2008-15
Dakota
2008-11
Dart
2013-15
Dodge Pickup
2008-10
Durango
2008-15
Grand Caravan
2007-15
Jouney
2010-15
Magnum
2008
Nitro
2008-11
Pacifica
2008
Tradesman
2012-15
RAM Pickup
2011-15
RAM ProMaster
2011-15
Sebring
2008-10
Town & Country
2008-15
Wrangler
2008-15
Renegade
2015
Patriot
2008-15
Liberty
2008-12
Grand Cherokee
2008-15
Compass
2008-15
Commander
2008-10
Cherokee
2014-15
Reset Oil Change Light Dodge / Chrysler / Plymouth / Jeep Procedure
- Turn ignition on, with engine off.
- On vehicles with keyless START, without pressing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/RUN position (Do not start the engine).
- Fully depress accelerator pedal slowly 3 times within 10 seconds.
- Turn ignition off.
- On vehicles with keyless START, without pressing the brake pedal, push the ENGINE START/STOP button once to return the ignition to the OFF/LOCK position.
- Start engine. If indicator message illuminates when engine is started, repeat reset procedure.