How to remove melted plastic from cast iron stove burner

A hot burner on the stove and a limited amount of counter space could lead to an accidental melting of a plastic bag, container or lid inadvertently placed on a stovetop. Aside from creating an awful smell, plastic can leave melted mess on your stove’s burner and hamper the ability to use your stove. With the proper tools and ventilation, you can get melted plastic off a stove burner and avoid replacing the burner or stovetop.

Coil or Disk Burner

  1. 1.

    Turn on the exhaust hood above your stove or open your kitchen window if the exhaust hood is not operating. Consider placing a fan near the stove to blow any smoke and fumes out the open window. If you have inadequate ventilation, put on a drywall mask to prevent inhaling any fumes.

  2. 2.

    Turn on the affected burner on low to warm the coil. Don't turn the heat higher than “2” or “3” to avoid damaging your utensils.

  3. 3.

    Scrape the melted plastic from the burner with a wooden spoon or spatula. Immediately wipe the plastic from the end of the utensil with paper towels between scrapes, so you don't spread the melted plastic to other areas on the burner or stove. Continue to scrape the burner until you remove as much of the plastic as possible.

  4. 4.

    Set the control knob on high heat. Allow the remaining plastic residue to burn off the stove’s coil or disk burner.

Glass Cooktop Burner

  1. 1.

    Allow the affected burner to cool. Apply two or three drops of glass cooktop cleaner to the plastic and the surrounding area.

  2. 2.

    Hold a safety scraper fitted with a razor blade as a 45-degree angle against the surface of the glass stove top. Apply slight pressure on the blade as you begin to scrape the melted plastic from the burner.

  3. 3.

    Apply an additional drop or two of the cleaner to the melted plastic after each pass of the scraper. Continue to use the scraper to remove the remainder of the plastic, wiping the scraper blade with paper towels between passes.

  4. 4.

    Wipe the burner with a scrubber sponge to remove any remaining plastic residue. Apply the cooktop cleaner to the entire surface and wipe the surface clean with a paper towel.

    Things You Will Need

    • Fan

    • Wooden spoon or spatula

    • Paper towels

    • Glass cook top cleaner

    • Safety scraper

    • Razor blades

    • Scrubber sponge

    • Drywall mask

Wood-burning stoves are very hot. This much we know.

But sometimes people underestimate just how hot they are. We hear tales of people trying to dry clothes by draping them over the stove in the same way they would a radiator.

Trainers, plastic cups and toys are among the items that have been melted on wood-burning stoves with some degree of regularity. Whether, as mentioned above, this was done deliberately with the intention of drying the item in question or whether the accidentally came into contact with the stove or was left sitting on a cold stove and forgotten about, the end result is usually the same.

That is that your lovely wood-burning stove body will now have a nasty blemish in the form of a melted and charred piece of fabric or plastic.

If you find yourself in that position, you will no doubt be keen to find a way to restore your stove to its former glory as soon as possible. That may or may not be realistic, but you can certainly have a go at getting it looking as good as possible.

Follow these tips to attempt to remove the melted material from your woodburner and get it looking like new again.

Removing melted plastic or material from a woodburner

The best way to remove the foreign object from the surface of your wood-burning stove is to rub down the affected area with wire wool. This will hopefully ensure that the melted item is worn away from the surface.

Of course, it is likely that you will also remove some of the stove paint in the process. That leads to the next step, which is to touch up the area on which you’ve used the wire wool with some stove paint.

Click here to buy stove paint.

Are you aware of how to get melted plastic off stove burner? We’ll show you how to clean it with a variety of approaches and less expensive cleaning equipment. Perhaps we fail to keep an eye on our spatula, spoon, or other plastic material we employed while the heat is on.

Plastic containers, bags, and even plastic trash from chips and cookies can end up on the stovetop accidentally. If not removed immediately, it will generate smoke or cause more damage to the burners.

We often consider purchasing chemicals to remove the plastic or simply burning up the cooktop to thoroughly burn the plastic, which is, of course, riskier. Instead, we may remove these stubborn melted plastics with just a few simple tools and techniques.

A gas-fueled stove, which is a type of stove with a burner on its stovetop, is owned by the vast majority of the people. Therefore, prepare yourself for a cleaning session as soon as you discover melted plastic on the burner. Then, we will begin our procedure of removing the molten material.

You’ll need a fan, a spatula, a damp towel, a sponge, vinegar, baking soda, and water now that you’ve prepped yourself. Because we’re discussing stove burners, they’re simple to remove before washing. Simply hold onto the edges and gently pull it off.

Step #1. Removing the plastic

Thin plastic bags are a frequent type of plastic discovered in the burner, and they’re usually easy to remove after a bit of heat. Scrape it with a spatula after it’s hot. This approach is only recommended for relatively small amounts of melted plastic. Ensure that you are doing the procedure with a fan, near a window, or in a ventilated room so that you will not inhale the fumes that the burning plastic will release.

Step #2. Baking soda and vinegar process

A dash of vinegar and baking soda solution is the most acceptable approach to removing rigid plastics instead of harsh chemicals. The most effective and safest approach to remove it is to place the burners in plastic bags with a dash of vinegar and baking soda solution. Read about cleaning with baking soda and vinegar.

Step #3. Wiping the burners

After finishing steps 1 and 2, rinse them in lukewarm water with soap and scrub them with your hand to remove any residue. Now that it’s been rinsed take a moist towel and gently wipe away the soap or vinegar-baking soda solution. Next, reinstall the burners by grasping the edges and replacing them in the same way you removed them. You can clean more than just the burner during this process; you can also clean the plates, knobs, and gas hoses. If we practice cleanliness in a minor way, it can help us live a healthier lifestyle.

Hazards When Melted Plastic Was Not Removed

Now that you know how to get melted plastic off stove burner, let’s talk about the health risks of leaving it neglected and using our stoves with melted plastics on the burners.

#1. It creates toxic fumes

Suppose you don’t remove the melted plastic before using your stove burners. In that case, the plastic will burn and produce black smoke, which is harmful because studies have shown that burning plastics releases dioxin, impairing the immune system if inhaled repeatedly. We must not underestimate the seriousness of burning plastics. Burning plastics can cause more harm to a person than to the environment, contrary to popular belief. It releases a variety of carcinogenic chemicals that have the potential to cause cancer.

#2. It can cause a house fire

Plastics are one of the most explosive things we use daily, and people frequently use them to light a fire when using a piece of coal. The flame that the plastics create is more significant and unpredictable. It can also cause damage to cookware and also soot on the surfaces.

People may overlook that small peck of melted plastic, but keep in mind that all house fires begin with a small flame after you cook. Therefore, if you leave the pot on the stove burner after it has been turned off, the plastic can still be lit and spread to other flammable materials such as oil, cloth, and even other plastics. It may be a good idea to read why does my wood stove smoke up the house. 

Maintenance In Keeping The Stove Burners Clean

Accident happens, the best way to avoid it is being prepared and knowledgeable about things we always do. For example, after each stove use, make sure there are no melted plastics left or misplaced on the burners. Look out for other dirt as well, as it can affect the performance of your stove.

Purchasing a stove is a wise decision because it allows us to prepare food daily. Keeping it clean and treating it with care can extend the life of the stove and all of the accessories that come with it, such as the stop top burners, glass or metal cover, and your knob will not become stuck if you do so it is clean.

Conclusion

You now know how to get melted plastic off stove burner. Remember to keep up with your kitchen’s upkeep and cleanliness. This ensures that your appliance not only looks good but also works well. Read how to make wood stove look new and why does my wood stove smoke up the house.

How do you get melted plastic off a burner?

Turn the surface burner/Calrod® element on and let it warm up. Be careful to not warm up the burner/element too much or it may burn the utensil used to scrap off the melted plastic or foil. When the plastic or foil softens, gently scrape as much off as possible using a wooden spoon or spatula.

How do you get melted plastic off of a cast iron stove?

Steps to Remove the Plastic: Use a dull knife to gently scrape off as much of the plastic as you can. Spray the plastic that remains with WD-40. Let the WD-40 sit on the plastic for a few minutes. Use a razor blade to scrape off the remaining plastic.

Toplist

Latest post

TAGs