RCA is one of the most well-known brands of universal remote controls for various appliances. Most RCA universal remote controls come with a guide that allows you to find the corresponding code to your television. However, if you are having trouble programming your remote, this step-by-step guide will teach you how to program your RCA universal remote, whether or not you have a code search button: Show
Note: Before programming your RCA universal remote, test it so you can guarantee it’s fully-functional. Make sure that the remote has batteries. Aside from that, you should also check the receiver of the device(s) you want to pair it with. Also, make sure that you are pointing the remote at the TV the whole time. How To Program RCA Universal Remote With a Code Search Button
If the code for the device doesn’t work, then you can do a code entry search as a secondary option. The feature allows you to go through all the possible codes until you see one that functions well. How To Program RCA Universal Remote Without a Code Search ButtonIf you don’t have a Code Search button, don’t worry. You can still program your remote control using codes from the manual or by checking the RCA remote code finder.
A universal remote control is truly a wonderful tool that can replace all of your other remotes. The pairing is the most challenging part of it all, but it will save you tons of time when you do. Not sure which remote control is right for you? Check out our ultimate guide to Universal Remotes by clicking the link. How do you program a RCA universal remote to a Magnavox DVD player?ON MOST REMOTES (Generalized):. Turn on the Magnavox DVD.. Press and hold the DVD and SEL buttons simultaneously for 3 seconds. ... . With the button lit, point the remote at the DVD and enter the DVD's 3, 4, or 5 digit code.. Verify by pressing the PLAY button.. Press the DVD button to store the 3, 4, or 5 digit code.. How do I program an old RCA universal remote to my DVD player?How do I program an RCA Universal Remote to a DVD player without codes? Power on your DVD player then and press and hold the DVD button on the remote; the light on the remote will blink once then stay on. Continue holding the DVD button and press the power button until the remote's light turns off and on.
How do you manually program a RCA universal remote?Power on the equipment you want to pair. Press and hold the Code Search button on the universal remote control until the light turns on. While still holding the Code Search Button, press the button on the universal remote that matches the equipment you're pairing (e.g. if it's a DVR, press the button for DVR).
|