The operation to register the device that you wish to connect to is called “pairing”. First, pair a device to use it with the headset for the first time.
Before starting the operation, make sure of the following:
- The iPhone is placed within 1 m (3 feet) of the headset.
- The headset is charged sufficiently.
- The operating instructions of the iPhone is in hand.
Remove both units of the headset from the charging case.
The headset turns on automatically. Check that the indicators (blue) flash.
Enter pairing mode on this headset.
When you pair the headset with a device for the first time after purchase or after initializing the headset (if the headset has no pairing information), the headset enters pairing mode automatically if you remove the headset from the charging case. In this case, put the headset on both ears and proceed to step 3.
When you pair a second or subsequent device (if the headset has pairing information for other devices), insert the headset units into both ears, then hold your fingers to the touch sensors on both the left and right units for about 7 seconds.
When both units of the headset are worn, you will hear the voice guidance say, “Bluetooth pairing”, from the left unit.
Unlock the screen of the iPhone if it is locked.
Find the headset on the iPhone.
- Select [Settings].
- Touch [Bluetooth].
- Touch the switch to turn on the
Bluetooth function.
Touch [WF-SP800N].
If Passkey (*) input is required, input “0000”.
The headset and iPhone are paired and connected with each other.
When both units of the headset are worn, you will hear the voice guidance say, “Bluetooth connected”, from the left unit.
If they are not connected, see “Connecting to a paired iPhone”.
If [WF-SP800N] does not appear on the display of the iPhone, try again from the beginning of step 4.
Hint
- The operation above is an example. For more details, refer to the operating instructions supplied with your iPhone.
- To delete all Bluetooth pairing information, see “Initializing the headset to restore factory settings”.
Note
- When pairing a device, [WF-SP800N], [LE_WF-SP800N], or both may be displayed on the connecting device. When both or [WF-SP800N] is displayed, select [WF-SP800N]; when [LE_WF-SP800N] is displayed, select [LE_WF-SP800N].
- If pairing is not established within 5 minutes, pairing mode is canceled. In this case, set the headset into the charging case, and start the operation again from step 1.
- Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
- Pairing information has been deleted after repair, etc.
- When a 9th device is paired.
The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration information of the paired device with the oldest connection date is overwritten with the information for the new device. - When the pairing information for the headset has been deleted from the Bluetooth device.
- When the headset is initialized.
All of the pairing information is deleted. In this case, delete the pairing information for the headset from the device and then pair them again.
- The headset can be paired with multiple devices, but can only play music from 1 paired device at a time.
There are 4 responses to this question
Please give more information, specifying exactly the steps you undertook to try and pair the devices together along with what feedback the devices gave (lights/sounds) and any error msgs either side reported.
When I turn them on there's a sound and after that a light starts flashing blue and red.
Then i press and hold play button for a few seconds like i read on internet.Sometimes they show up on my iPhone Bluetooth sometimes they dont.But on my PS3 they show up very fast.
To clarify, are they pairing to some devices or to nothing? The question was defined as a problem connecting to an iPhone but its just the iPhone it won't connect to ?
Ah,forget it.Its just stupid headphones.
Can you contribute an answer to this question?
If you can assist the users problem you can quickly respond by completing the fields below to respond.
Other questions relating to Bytech BC-AU-BO-104
We don't have any solutions for this product yet BUT there are solutions for other products by the same brand which may be able to help you ?!
Take action, resolve your Bluetooth problems!
Want to shop for the devices discussed in this question?
< Back to questions list
Bluetooth Doctor is not responsible for, and expressly disclaims all liability for, damages of any kind arising out of use, reference to, or reliance on any information contained within the site. Never undertake manual repairs or modifications to hardware if without qualifications and always seek guidance from your retailer if you can't find a solution to your problem.
- BUY Bluetooth Products
- Support Us!
- Currently Trending
- Advertise with us
- Visit our sister website BluetoothAndUSB3.com