How do i reset my thermador ice maker

22

5. Push the filter cartridge with the

cap in a horizontal position all
the way into the opening in the
base panel.

6. Rotate the filter cartridge by

90

°

-180

°

gently in a clockwise

direction until the cap is in a
horizontal position.

i

After changing the filter, reset
the filter display.

i

The appliance might be used
without a "UltraClarity" water
filter. If you choose this option
replace the water filter by a
water filter substitute cartridge.
To purchase a water filter
substitute cartridge contact your
local dealer or call
1-800-578-6890.

Resetting the filter
display

i

If the filter display is not reset,
the next required filter change
cannot be signalled by the
display.

After each filter change:

q Simultaneously hold down the

SUPER COOL and ICE buttons
for 3 seconds.

Deactivating the filter
display

i

The appliance might be used
without a "UltraClarity" water
filter. If you choose this option
replace the water filter by a
water filter substitute cartridge.
In this case the filter display
might be deactivated to prevent
filter change messages.
To purchase a water filter
substitute cartridge contact
your local dealer or call
1-800-578-6890.

d

WARNING

d

To avoid serious illness or death,
do not deactivate the filter display
while using an "UltraClarity" water
filter.

To deactivate the filter display:

q Simultaneously hold down the

SETUP and ICE buttons for
3 seconds.

i

ReĆactivate the filter display by
pressing the SUPER and ICE
buttons for 3 seconds
simultaneously.

We recommend changing your water filter every 6 months or when your refrigerator or freezer alerts you to help achieve great-tasting water. To change your water filter, first, locate it. Refer to your owner's manual if you have trouble finding it. Don’t know which filter to purchase? Use our helpful filter finder.

Replacing the Water Filter in Your Built-in Refrigerator

If your water filter is located on the bottom left of the appliance, follow the steps below or watch the video.

1. Open your new water filter and remove any plastic wrap. If your new filter is packaged with a cap, make sure to remove it.
2. Remove the old filter by turning the cap counter-clockwise. Take the filter out.
3. Remove the cap located at the bottom of the old filter and place it on the bottom of the new filter.
4. Insert the new filter (with cap attached) by sliding it in and rotating clockwise.

Additional tips for UltraClarity water filters (REPLFLTR10, REPLFLTR30)

• If the filter does not easily slide in, rotate it clockwise while pushing it in.
• If the cap sticks out, lift the filter up (while it’s inserted) and rotate clockwise while pushing in.

5. Align the cap with the raised lines on the refrigerator/freezer.
6. Discard the ice cubes produced during the first 24 hours. If your appliance has a water dispenser, dispense water for 5 minutes and then discard.

SEE MORE

Replacing the Water Filter in Your Freestanding Refrigerator

If your filter is located on the top right of the appliance, follow these steps or watch the video.

1. Open your new water filter and remove any plastic wrap. If your new filter is packaged with a cap, make sure to remove it.
2. To access the old water filter, reach into the recess below the filter cover. Pull the cover slightly forward and move it to the bottom left. The filter is now accessible.
3. Turn the old water filter counter-clockwise to remove it.
4. Insert the new filter and turn it clockwise.
5. Once the filter is secure, move the filter cover to the right and slide it back as far as it can go.
6. Discard the ice cubes produced during the first 24 hours. If your appliance has a water dispenser, dispense water for 5 minutes and then discard.

SEE MORE

Replacing a Water Filter in Your Under Counter Refrigeration

1. Open your new water filter and remove any plastic wrap. If your new filter is packaged with a cap, make sure to remove it.
2. Remove the old filter by turning the cap counter-clockwise. Take the filter out.
3. Remove the cap located at the bottom of the old filter and place it on the bottom of the new filter.
4. Insert the new filter (with cap attached) by sliding it in and rotating clockwise to lock into place.

SEE MORE

Purchasing a Water Filter

Don’t know which water filter to purchase? Click here to learn which filter your refrigerator or freezer uses.

If you already know which filter to purchase, click on the link below for quick access to the water filter section of the Thermador Accessories Store. Avoid potential counterfeit filters by purchasing original and authentic Thermador filters there.

SEE MORE

Purchase Now

More Questions?

Why is my Thermador not making ice?

Where is the reset button on my ice maker?

Why is my fridge not making ice?